Half Tire Square

Design by: playgroundIdeas

Category: Groundlevel, Tyre Elements

Design Description

This makes a great center structure for a playground. It also allows many children to be involved and play at the same time.

Building Steps

1. Bury the tires in a square formation. All tires must be buried at least half way into the earth to better secure the tires.

Materials

• x 21 Truck Tires
This element can be as large or small as you like.

Tools

• Spade
• Tape Measure

This plan is designed to be used in conjunction with your appropriate safety guidelines / standards and the advice of local skilled builders / engineers.  If your location has no guidelines or standards, we have provided a summary of many of the most common hazards here.

These plans are for pre-school (4+) and school-age children, and are not designed for babies and toddlers. Designs will need to be redesigned for these age groups.

This element needs soft fall below it in the safe fall zone.

This element can have overlapping safe fall areas.

This element must have a clear safe fall area of 1500 mm (5’) around it.

Depending on the size of the tires, this element may contain an entrapment hazard. All spaces more than 23.5″ (600mm) from ground level must not be between 3.5″ (89mm) and 9″ (230mm) in diameter in any direction.

**IMPORTANT** Please see safety guidelines here for further details on the above safety points.

Share

LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING

This LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING is offered for support, guidance and advice only and should not be relied upon in place of professional or expert advice. We make no representation or warranty of any kind, express or implied, about the completeness, accuracy, reliability or suitability with respect to the LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING. Further, Playground Ideas make no representation that this LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING adhere to any safety standards in your country and therefore each project/playground built should be assessed on an individual basis in order to ensure compliance with national safety standards in the applicable country.

To the maximum extent permitted by law, in no event will Playground Ideas be liable for any loss or damage including without limitation, direct, indirect or consequential loss or damage, loss of profits or loss of opportunity arising out of or in any way connected with the any person acting or refraining from acting in reliance of the LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING or for failure to comply with the national safety standards in the applicable country, whether based in contract, tort (including negligence), strict liability or otherwise.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. This means if you use or feature this work in any website, publication, presentation etc, you must clearly attribute/ credit the work to www.playgroundideas.org (but not in any way that suggests that PlaygroundIDEAS endorses you or your use of the work). You may not use this work for commercial purposes without explicit permission. You may not alter, transform, or build upon this work but you may create and add new work to the PlaygroundIDEAS design library to share. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/3.0/.